Secure Reliable Transport

[G8KOE]

SRT REPEATER INPUT OUTPUT

INPUT
SRT1 srt://g8koe.ddns.net:22221?mode=caller&pbkeylen=16&passphrase=g8koesrt2024
SRT2 srt://g8koe.ddns.net:22222?mode=caller&pbkeylen=16&passphrase=g8koesrt2024
SRT3 srt://g8koe.ddns.net:22223?mode=caller&pbkeylen=16&passphrase=g8koesrt2024
SRT4 srt://g8koe.ddns.net:22224?mode=caller&pbkeylen=16&passphrase=g8koesrt2024

OUTPUT
VLC srt://g8koe.ddns.net:8890?streamid=read:g8koe


Just an update that the SRT Repeater with G4FKK logic using a Laptop and OBS to stream to the MTXserver is working.
It is much smoother in operation.

73's
Martin
G8KOE

[G8KOE]

My SRT REPEATER is now testing a BATC LINK g8koe

73's
Martin
G8KOE

[g8lce]

Hi Martin,

You could try using this page to generate a QR photo to make it easier for people to use your SRT repeater.

https://www.haivision.com/play-pro-settings-tool/

It may work!

Here is the QR code I made for my SRT player for testing.

SRT player input.png (82.92 KiB) Viewed 943 times

The output can be see on VLC at

rtsp://82.144.238.35:8888/stream1

This is a temporary setup!

Hope it works.....


Martin G8LCE

[g8lce]

I have tried this QR code using a QR code scanner on my phone and it worked. I do have the haivision app installed.
Phone program:
https://www.haivision.com/products/haivision-play-pro/

Martin G8LCE

[KA5BBC]

Martin.. I am not sure how I missed this but this is exactly what I have been trying to find & build for our extremely marginal area.

I am going to have many questions but I am going to follow the stages you went through in an effort to duplicate your current build.

I had many issues with trying to get OnPremises SRT Player for RPi working for me but you have given me a new hope.

[G8KOE]

Hi Andy,

I had help from John G7JTT with the Media MTX server.
The logic was Martin G4FKK.
A block diagram of how it is connected.

TYPO should be QO100 not OO100

73's
Martin
G8KOE

[KA5BBC]

That is a great help, thank you.

So far I have 1x SRT rpiPlayer and a BATC repeater controller connected to a quadviewer and then in to a stream encoder going to the BATC Streamer site.

I have had no luck connecting to the player from my mobile phone, no matter what app I use, but OBS and my ATEM Mini have no issues even with an external url. I was hoping to link in from work tomorrow but that may be belayed until next week after a weekend of further fiddling.

Unfortunately, I ran out of RPi 4s otherwise I would have all 4 channels hooked up to something. I'm holding on to the single RPi 5 incase I do need a server of some kind.

[g8lce]

SRT Player works on RPi 3 and 2 if you have any hanging around.

Martin G8LCE

[KA5BBC]

I think I gave all of those away. Time for more shopping I suppose....

I got the SRT stream to work correctly from my work place (University of South Florida) to my shack and out to the BATC Streamer, although with a 20+sec delay.

I still can not get a phone app to connect, always getting am Auth error.

I also cannot get the Orei quadviewer to pass audio reliably, even on one channel, so will try to pick up a cheap mixer today also.