Ok I have an I5 too
Do you have default image when you mixing? No problem in OBS but on QO100, i can see two images fusionned , they jump and , I must turn off tx , and after it is ok.
I try to contact you next week, I am in south France
When I am in TX mode on QO100, and I try to do image TRANSITION with OBS, I can see on Minitioun RX two images in same time, many pixels, and images jump quickly.
I must stop TX, TX again and transition can finished.
If I contact you, I could you done see.
All best John
I was just playing around with OBS to Portsdown and found the following :
Instead of using the @ 126.96.36.199:20000 in between OBS and ffmpeg (and if ffmpeg is on the same PC as OBS), use the "local" address 127.0.0.1:20000
It helps on my side, I have less retries in the ffmpeg window
I have a question : how do you calculate the FFVBitrate ?
73 - Christian
Your Muxer settings and Video encoder settings are excellent!
Am sending a DVB-S2 modulator RTP TS, we had packet loss till I tried your setting
We are going much faster at 5Msym 3/4 8PSK, but works well
If the scene fades to black the encoder has difficulty still it this normal or is there a fix?
The pkt_size=1316&bitrate= 495700
So the 1316 is 7 X 188 packets
What does the 495700 the bitrate achieve?
Thanks again Roger VK5YYY