Build your own USB tuner- will work with Minitioune

[G8XZD-TV]

Thanks Charles. I'm assured its right - it just looks wrong !

[g8vpg]

Ian,
Mine has a solder splash in the same position and it works OK.
73 Shaun.

[g6crf]

Does anyone know how you get the software other than by logging in to the VivaDATV site.

I've tried to reactivate an old login to which I have forgotten the password and I have also tried to re-register after waiting 3 days. However nothing ever seems to get me an email from the site, and yes I have checked my spam and junk email boxes.

Regards
Terry
G6CRF/G0CRF

Can I ask this question again please, I've still not received anything from the VivaDATV site.
Thanks
Terry

[g8gtz]

Hi Terry

Sent you an email.

73

Noel - G8GTZ

[F6DZP]

I have activated G0CRF on Monday or Tuesday. Yes, sorry I was at Friedrichshafen and could not do the job there during the week-end.

I have today found your older registered call "G6CRF". I cannot read your password, but I can reset it. I have made it and sent you a private mail.

Jean-Pierre F6DZP

[F6DZP]

Hello,

A new Minitioune version is available.
http://www.vivadatv.org/viewtopic.php?f ... 1153#p1153

with TestMyMinitiouner in English

Jean-Pierre F6DZP

[g8gtz]

I've just done an update on PCB and tuners in the shop thread http://www.batc.org.uk/forum/viewtopic.php?f=88&t=4199

Please reply there for shop questions - technical questions, continue to discuss here.

Noel - G8GTZ

[G4EWJ]

On the Pipo, I'm getting 'NIM not detected'. It installed the 2.12.0 drivers on its own when I plugged it in. The module is set to 3 for Eardatek. I tried running as admin and also tried PipoTioune, with the same results.

Brian

[G4EWJ]

I ran the software removal tool and re-installed the drivers, but no luck.

The drivers are now 2.12.4, so the link in a previous posting no longer works.

Brian

[G4KLB]

PCBs and kits should be in the BATC Shop in about a week.
Here is a sneak preview of the evaluation build https://www.youtube.com/watch?v=vXUIQPeslwM