Help and support for the BATC DTX1 ATV digital encoder and modulator system
Post Reply
Posts: 1
Joined: Tue Mar 31, 2015 4:55 am


Post by scsi » Tue Mar 31, 2015 4:59 am

I want to design a PA for my OFDM at 433MHZ. The P1db shouldbe 2W,could you help to recommend a chip for this?Thanks

Posts: 58
Joined: Thu Aug 30, 2012 6:01 pm

Re: About OFDM PA

Post by MN-tech » Thu Apr 02, 2015 2:48 am

The RA07H4047M module should do very well. It's nominal 7 watt device but the peak to average power ratio of OFDM may need the overhead to prevent spectral growth. The gain is about 35 dB at 2 watts.


Posts: 56
Joined: Fri Feb 15, 2013 2:03 am

Re: About OFDM PA

Post by oe7dbh » Fri Apr 03, 2015 12:04 am

So let's be honest.
Even if you have an OFDM transmitter with -70dB Signal shoulder, and you want have a minimum of -40 dB signal shoulder Output with almost constant MER ..... then you get no more than:

800mW OFDM Signal with RA07H4047
5,0 Watt OFDM Signal with RA30H4047
9,0 Watt OFDM Signal with RA60H4047

http://www.oe7forum.at/viewtopic.php?f= ... =225#p1488

http://www.oe7forum.at/viewtopic.php?f= ... =180#p1394

http://www.oe7forum.at/viewtopic.php?f= ... =120#p1299


vy 73 Darko OE7DBH

Posts: 52
Joined: Sat Jun 22, 2013 10:42 am

Re: About OFDM PA

Post by g4wvu » Fri Apr 03, 2015 11:06 pm

DVB-T seems pretty bad news as far as generating sensible (DX) type power output is concerned. (Typical back-off 8-10dB !)
Makes DVB-S look very forgiving by comparisom....

Post Reply

Return to “BATC DTX1”