Portsdown 4 enclosure options?

[G4GHD]

I've recently built a Portsdown 4 and am using the 7" screen as mentioned by Gareth G4XAT on page 24 of CQ-TV 289.
Unfortunately this screen has different mounting point spacings from the official Pi 7" touchscreen, which would appear to rule out the SmartiPi Touch 2 Case, which has been mentioned on the forum previously. Any other suggestions? FWIW, the screen's horizontal mounting holes are spaced approx. 155mm apart, while the vertical spacing is about 93mm.

[g0mjw]

I would suggest a 3D printed case. I have been working on a design with Colin, G4KLB. We can send you the STL files.

Screenshot 2025-10-20 125511.png (23.21 KiB) Viewed 129 times

Mounting the screen is easy, it just requires two brackets making, one for either side to fit to the case. You can either 3D print something or just bend a sheet of aluminium.

Screenshot 2025-10-20 125256.png (63.62 KiB) Viewed 129 times

Mike

[G4GHD]

Thanks Mike, looks good, but regrettably I don't have a 3D printer myself.

[radiogareth]

How about one of these, but mounted on its back, ie standing upright and 'looking up at you'?
https://www.ebay.co.uk/itm/406288742719
or something like this?
https://www.tme.eu/gb/details/g1507/des ... es/gainta/
I googled "console instrument case" which throws up several options.
Gareth