Status Banner

Discussions about the Ryde "Set-top Box" Style Digital ATV Receiver. See https://wiki.batc.org.uk/Ryde_Receiver
Post Reply
g0mjw
Posts: 2569
Joined: Sat Sep 20, 2014 9:15 am

Re: Status Banner

Post by g0mjw » Tue Oct 13, 2020 11:05 am

Hi Dave, Tim

It is compatible with the GPIO board. Each button that is connected has a pull-up to 3.3V. The buttons connect them to ground, so they are all active low.
Diagram
Diagram
Capture.JPG (163.96 KiB) Viewed 2568 times
Pin 26 in the GPIO connector is not connected to anything but just to confuse people it is GPIO7. GPIO26 is on GPIO connector pin 37 and used for OSD. The power button is GPIO pin 36, which corresponds to GPIO16.

I am sure the use of GPIO physical pins as GPIO ports with different numbering has caused no end of confusion and many re-worked PCBs.

Mike
Top
G4WIM
Posts: 379
Joined: Thu Jan 29, 2015 8:36 pm

Re: Status Banner

Post by G4WIM » Tue Oct 13, 2020 1:37 pm

Thanks Tim, Mike - all clear and understood now, won't distract you anymore :-)

73 Tim
Top
Post Reply

Return to “The Ryde Digital ATV Receiver”