Limenet micro - wifierror

Discussion about this major DATV Project. See https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
g4bao
Posts: 22
Joined: Fri Jan 12, 2018 1:14 pm

Limenet micro - wifierror

Post by g4bao » Sun Nov 17, 2019 1:07 pm

Getting an error when I try and set up the wifi on the Limnenet Portsdown:

"Failed to connect to non-global ctrl_ifname: wlan0"

wtf?
Seems to be related to the country setting but , but  wpa_supplicant.conf file looks right as below:

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

##STARTNW
country=GB
network={
    ssid="WORKSHOP"
    psk=131aae67ca5fa707b9169e5aeea196d1e85742f16c8aabb012c5f5d8ff4d9283
}
##ENDNW
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
73 John

g4bao
Posts: 22
Joined: Fri Jan 12, 2018 1:14 pm

Re: Limenet micro - wifierror

Post by g4bao » Sun Nov 17, 2019 2:08 pm

I dug a little deeper in to the PI using
sudo raspi-config
and options 2 Network options
and N2 Wifi
"No wireless interface found"

That's worrying! HELP!

g4eml
Posts: 753
Joined: Thu Apr 26, 2018 9:36 am

Re: Limenet micro - wifierror

Post by g4eml » Sun Nov 17, 2019 2:14 pm

Hi John,

Are you sure the LimeNET micro has a WiFi chip? I was under the impression it didn’t but I don’t know for certain.

Colin.

g4bao
Posts: 22
Joined: Fri Jan 12, 2018 1:14 pm

Re: Limenet micro - wifierror

Post by g4bao » Sun Nov 17, 2019 2:25 pm

Yep! You nailed it!

Just found that out now by looking at the BOM resistors.
The clue should have been the lack of an antenna connector, but I wrongly assumed there was an on-board one!
:lol: :roll:
What a twit!

73
JOhn

g4eml
Posts: 753
Joined: Thu Apr 26, 2018 9:36 am

Re: Limenet micro - wifierror

Post by g4eml » Sun Nov 17, 2019 2:36 pm

If you really need WiFi it would probably work with a USB dongle.
Colin.

Post Reply

Return to “The Portsdown Digital ATV System”