Changed twiddle factor, no change.
Same result using H264 (superfast).
Charles any idea?
- TX queue DVB-S2.jpg (333.73 KiB) Viewed 2960 times
DATV Express TX queue DVB-S2 mode
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
DATV Express TX queue DVB-S2 mode
TX queue filling rapidly to 100% in DVB-S2 mode.
Changed twiddle factor, no change.
Same result using H264 (superfast).
Charles any idea?
Changed twiddle factor, no change.
Same result using H264 (superfast).
Charles any idea?
73 de ON1AVO
Freddy
Freddy
Re: DATV Express TX queue DVB-S2 mode
Yes,
I have had this problem myself.
After a Windows 10 update the system replaced the libusb-win32 driver with WinUSB
so you will need to run Zadig again and re-install the correct driver.
You will get a message asking you whether you want to downgrade the driver say yes.
Hope that fixes it.
- Charles
I have had this problem myself.
After a Windows 10 update the system replaced the libusb-win32 driver with WinUSB
so you will need to run Zadig again and re-install the correct driver.
You will get a message asking you whether you want to downgrade the driver say yes.
Hope that fixes it.
- Charles