3-D printed end-plate templates to either use as-is or as templates.
Untouched Hammond box in Blue.
£200 with collection at CAT25 or postage of your choice at cost.
Gareth
- WH1.jpg (568.93 KiB) Viewed 292 times
- WH2.jpg (576.33 KiB) Viewed 292 times
WINTERHILL with both tuners fitted and RPI4/SD card
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Adverts will be archived when the seller indicates that the item is sold or after one year. If you wish to keep advertising after one year, please re-post.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Adverts will be archived when the seller indicates that the item is sold or after one year. If you wish to keep advertising after one year, please re-post.
Thank you
-
radiogareth
- Posts: 1379
- Joined: Wed Jan 06, 2016 9:46 am
WINTERHILL with both tuners fitted and RPI4/SD card
Bought a while back as tested and working but never commissioned by me. (I have 2 Minitiouners and 2 Pico-tuners) Other than adding a second NIM so it can rx 4 stations its as-built and appears complete other than the extra-optional LNB power supply boards.
3-D printed end-plate templates to either use as-is or as templates.
Untouched Hammond box in Blue.
£200 with collection at CAT25 or postage of your choice at cost.
Gareth
3-D printed end-plate templates to either use as-is or as templates.
Untouched Hammond box in Blue.
£200 with collection at CAT25 or postage of your choice at cost.
Gareth