Pico Minitioune problem

[OE8PCK]

Hi all,

I was wondering if anyone else has seen this problem.
The PICO blinks OK. The Minitioune signal runs OK with both screens working I can change the frequencies ok.
BUT after about 2 minutes the stream just cuts off and the Minitioune freezes until I turn the Minitioune off and then I can restart open tuner.
Colin G4EML has given me a couple of hints regarding VLC setup etc. but I am still having the same problems. I have even used another PC but have the same problem. At the moment I am at a loss as what to try next. Has anyone had this problem or can make a suggestion what i should check. The PICO firmware is v 10. When it works the picture is super and no sign of any problems.

73 de Paul OE8PCK

[g8lce]

Seems simple but try changing the USB lead. I had a similar problem and it was the USB lead. Not saying the system is 100% but it is much better now...

53632292478_a74513c8fc_c.jpg (93.94 KiB) Viewed 4767 times

Note that this is GB3NQ transmitting on 1316Mhz 1080 HD and 1318MHz 480 LD (2000ksr & 333ksr)

Martin G8LCE

[OE8PCK]

Open Tuner dump.pdf

(271.37 KiB) Downloaded 367 times

Thankyou for your prompt reply.
I have attached the file of the OPEN TUNER which shows the tuner starting until it stops working.
I am afraid I do not understand it, but perhaps someone can see what is going wrong

Many thanks.

73 de Paul OE8PCK

[zr6tg]

Hi Paul,

The log file doesn't show anything worthwhile that would indicate why its freezing.

Can you try this new version please: https://www.dropbox.com/scl/fi/j9vyrw3a ... 4k1o3&dl=0

And update your picotuner to 0.11

Let me know what you find. the logfile will be stored in the logs folder

T

[OE8PCK]

tnx Tom, I will try. I am on holiday i will be back at the end of next week.
73 de Paul OE8PCK

[OE8PCK]

Hi Tom, I am back from holiday and now I have got the Log where the RX stops working after a minute or so.
I do hope you can see what I am doing wrong.

[OE8PCK]

I have tried to attach the file but it is too big. Help???!!!

How do I get the LOG to you Tom?

[Basil]

Have you "zipped" it up with maximum compression? Can you put it on your own server or elsewhere for Tom to download it, rather than sending it direct?

[OE8PCK]

Thanks for the tip. I have now zipped the log. I hope that TOM can do something with it.
The program works fine and then just cuts off.

[zr6tg]

Thanks Paul, I'll check it out and let you know.

T