Hi All,
I am looking for someone with a 3D printer, to print a couple of T-Beam Supreme v3 cases for me.
This looks a reasonable design.
https://www.printables.com/model/705817 ... preme-case
- Charles G4GUO
Someone to print a couple of T-Beam Supreme Cases
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Adverts will be archived when the poster indicates that the item is found or after one year. If you wish to keep advertising after one year, please re-post.
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Adverts will be archived when the poster indicates that the item is found or after one year. If you wish to keep advertising after one year, please re-post.
-
- Posts: 1297
- Joined: Wed Jan 06, 2016 9:46 am
Re: Someone to print a couple of T-Beam Supreme Cases
Charles, there seem to be several variations in the files for different models.
If you can work out which ones you actually want, I could print them for you.
The PrusaSlicer software to view and slice the files is a free download. Default settings for a Prusa I3 MK3S and I'd suggest PLA and 0.2mm Quality as settings. Probably a 6+ hour print job depending on which parts are selected....
Gareth
If you can work out which ones you actually want, I could print them for you.
The PrusaSlicer software to view and slice the files is a free download. Default settings for a Prusa I3 MK3S and I'd suggest PLA and 0.2mm Quality as settings. Probably a 6+ hour print job depending on which parts are selected....
Gareth
Re: Someone to print a couple of T-Beam Supreme Cases
Hi Gareth,
I think I need the following
Alley Cat TBeam Smooth Front No Mount.stl
Alley Cat TBeam Smooth Back 10mm.stl
Button1.stl Needs 2.
Button2.stl
That, I believe is for a unit with no tripod adapter mount, and space only for the stock antenna.
Smooth I assume refers to the texture. As the job is going to take so long it might be better to only print one.
I will leave the colour up to you, but either dark/khaki or bright fluorescent orange/yellow.
It is for a portable 868 MHz Meshtastic node (the latest internet radio craze).
Thanks
- Charles
I think I need the following
Alley Cat TBeam Smooth Front No Mount.stl
Alley Cat TBeam Smooth Back 10mm.stl
Button1.stl Needs 2.
Button2.stl
That, I believe is for a unit with no tripod adapter mount, and space only for the stock antenna.
Smooth I assume refers to the texture. As the job is going to take so long it might be better to only print one.
I will leave the colour up to you, but either dark/khaki or bright fluorescent orange/yellow.
It is for a portable 868 MHz Meshtastic node (the latest internet radio craze).
Thanks
- Charles
-
- Posts: 1297
- Joined: Wed Jan 06, 2016 9:46 am
Re: Someone to print a couple of T-Beam Supreme Cases
Sorry, only just seen this....'army green' it is, 5 hours or so.
Email me you preferred delivery address....
Gareth
Email me you preferred delivery address....
Gareth
Re: Someone to print a couple of T-Beam Supreme Cases
Thanks, Gareth.
I think we can close/archive this thread now.
- Charles
I think we can close/archive this thread now.
- Charles