Adalm Pluto F5OEO firmware with nocalib question?

[M0LIH]

Evening all

I am currently trying to set up for tx QO100. Setup is mostly going to plan however the PTT board and relay are taking a little longer than planned (always the way isn't it?). Just wondering if the nocalib argument for the stream to an ADALM-Pluto with F5OEO firmware loaded completely surprises the calibration spike or not?

Many Thanks
Ian
M0LIH (usually operating GB3RN)

[M0LIH]

I.e. would it be safe without the RF relay

[g0mjw]

How much did your PA cost and is it worth risking?

[M0LIH]

Unless I get an answer no it is not, however both the person who originally was providing the PTT board and the person providing the relay have let me down. Coincidently if you ever have to use an ebay seller named arnoldlandh then avoid like the plague!

[M0LIH]

Good news, the board has arrived, been soldered into the Pluto and (fingers crossed), so far so good. Unfortunately due to the terrible Ebay seller I am now awaiting delivery of the SMA relay from Poland..... must be patient!