FFmpeg HELP

Discussion about this major DATV Project. See also https://wiki.batc.org.uk/The_Portsdown_Transmitter
Post Reply
G8KOE
Posts: 10
Joined: Fri Aug 09, 2019 8:14 am

FFmpeg HELP

Post by G8KOE » Wed Nov 06, 2019 9:10 am

Hi,
I am using
vMIX
Batch file “Feb 2019 by Evariste F5OEO - QO-100 Release 0.9” This I have found to be excellent.
Portsdown Transmitter
Lime Mini SDR
Computer Dell i5 Windows 10 Pro 64BIT 8GB Ram.
When I run the batch file get the error:-
Thread message queue blocking: consider raising the thread_queue_size option (current value: 8)
My programming knowledge is very limited.
Is this something that should concern me?
If so how do I correct it.
I am getting good results even with the error.
Hope you can help.
73’s
Martin
G8KOE

G8GKQ
Site Admin
Posts: 1307
Joined: Sun Mar 22, 2009 1:21 pm

Re: FFmpeg HELP

Post by G8GKQ » Wed Nov 06, 2019 9:29 am

Hi Martin

If you are getting good results I would hesitate to change anything. It's certainly not doing any harm.

I have tried curing this error in the past by increasing the thread_queue_size (can't remember how), but it did not improve the transmitted picture noticeably.

Dave, G8GKQ

G8KOE
Posts: 10
Joined: Fri Aug 09, 2019 8:14 am

Re: FFmpeg HELP

Post by G8KOE » Wed Nov 06, 2019 10:31 am

Hi Dave,
Thanks for quick reply.
On intense sound can get some breakup didn't know if this may not be connected.
I will keep testing.
73's
Martin
G8KOE

Post Reply

Return to “The Portsdown Digital ATV System”