FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Items for sale here please
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Adverts will be archived when the seller indicates that the item is sold or after one year. If you wish to keep advertising after one year, please re-post.

Thank you
Post Reply
G8PEF
Posts: 155
Joined: Mon Oct 30, 2017 6:42 pm

FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Post by G8PEF » Thu May 23, 2019 1:30 pm

Extruded black anodised aluminium case, plus set of front/rear panels, pcb mounting lugs and blanking pieces for LimeSDR, and set of 12 u.FL to SMA (f) leads, 100mm long. Bought a little while ago, but my plans changed, so they’re now sitting around
Brand new, so looking to recover what they cost me (£27)...
Looking for £30 posted, or feel free to make a (sensible) offer - you /might/ get lucky :)
Payment preferably by PayPal F&F to avoid fees.

I’ve tried to attach pics, but it won’t let me - PM or email me if you’d like pics.

(EDIT: Added the case that I thought I'd lost to bundle - and also see below for pics, kindly posted by Mike - note that this case is black anodised, rather than the gold shown in MIke's pictures)

73
John G8PEF
Last edited by G8PEF on Tue Oct 15, 2019 1:43 pm, edited 3 times in total.

G8PEF
Posts: 155
Joined: Mon Oct 30, 2017 6:42 pm

Re: FS - LimeSDR front/rear panels and set of u.FL to SMA leads

Post by G8PEF » Sat Oct 05, 2019 11:39 am

Updated!

Ive now found the case that had gone AWOL, so looking for £30 posted or near offer.


John, G8PEF
Last edited by G8PEF on Tue Oct 15, 2019 1:39 pm, edited 1 time in total.

g0mjw
Posts: 960
Joined: Sat Sep 20, 2014 9:15 am

Re: FS - LimeSDR front/rear panels and set of u.FL to SMA leads

Post by g0mjw » Sat Oct 05, 2019 11:53 am

This what you mean? I have one already...
1.jpg
1.jpg (119.78 KiB) Viewed 692 times
2.jpg
2.jpg (140.87 KiB) Viewed 692 times

G8PEF
Posts: 155
Joined: Mon Oct 30, 2017 6:42 pm

Re: FS - LimeSDR front/rear panels and set of u.FL to SMA leads

Post by G8PEF » Sat Oct 05, 2019 7:40 pm

Yes, Mike - exactly those :) Thanks for posting the pics - I couldn't manage to get the forum to accept mine (possibly too big -direct from phone's camera).
For the benefit of any potential buyers, there are also 4 little PCB mounting lugs (which allow the PCB to slide into the guideways in the aluminium extruded case shown, and some small blanking pieces to change the size of the 'USB hole' to suit whichever version of the LimeSDR you have.

73, John
G8PEF

G4uvz
Posts: 168
Joined: Sat Dec 09, 2017 10:30 am

Re: FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Post by G4uvz » Tue Oct 15, 2019 9:39 pm

Looks really nice...but I am confused..my Lime Mini USB has just 2 SMA connectors TX and RX ..what on earth are the other 10 SMA's for???

G8PEF
Posts: 155
Joined: Mon Oct 30, 2017 6:42 pm

Re: FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Post by G8PEF » Tue Oct 15, 2019 9:52 pm

G4uvz wrote:
Tue Oct 15, 2019 9:39 pm
Looks really nice...but I am confused..my Lime Mini USB has just 2 SMA connectors TX and RX ..what on earth are the other 10 SMA's for???
Hi,
This case and panels are meant for the 'full-size' LimeSDR, rather than the Lime Mini.
I guess you could repurpose it for a Lime Mini if necessary - there's plenty of room - although you'd have to figure a way to retain the Mini in place without putting stress on the USB connector, which is quite vulnerable to parting company with the PCB...

In answer to the other part of your question, though, the LimeSDR has 4 TX outputs (2 'High' frequency, 2 'Low' frequency), 6 RX inputs (2 High, 2 Low, 2 Wide) a ' Clock' (10MHz Reference) Input, and a Clock output (copy of what went in on CLK in).

73
John, G8PEF

G4uvz
Posts: 168
Joined: Sat Dec 09, 2017 10:30 am

Re: FS - LimeSDR Case, front/rear panels and set of u.FL to SMA leads

Post by G4uvz » Wed Oct 16, 2019 8:12 am

Thanks John for the info..that explains all...I will stick with my old 'ex Microwave Modules' converter diecast box...If it ain't broke etc etc

A

Post Reply

Return to “For Sale”