Portsdown Stretch 2019 Software Update 201902250

Discussion about this major DATV Project. See also https://wiki.batc.org.uk/The_Portsdown_Transmitter
ON1AVO
Posts: 21
Joined: Sun Nov 20, 2011 2:35 pm

Re: Portsdown Stretch 2019 Software Update 201902250

Post by ON1AVO » Thu Mar 14, 2019 1:12 pm

Dave,
Quick check and no problem decoding the TS.
Video bitrate +/- 110 kbps

Freddy
Last edited by ON1AVO on Thu Mar 14, 2019 1:14 pm, edited 1 time in total.

G8GKQ
Site Admin
Posts: 1178
Joined: Sun Mar 22, 2009 1:21 pm

Re: Portsdown Stretch 2019 Software Update 201902250

Post by G8GKQ » Thu Mar 14, 2019 1:14 pm

OK

I think that the available bitrate is just too low at 125KS FEC 1/4

Dave

F5CAU
Posts: 2
Joined: Wed Apr 24, 2019 10:24 am

Re: Portsdown Stretch 2019 Software Update 201902250

Post by F5CAU » Wed Apr 24, 2019 10:49 am

Thanks for that great software :D , is there an updated documentation ? some commands are not obvious, ie CAPTION ON/OFF has no effect here !
73 Gil F5CAU

G8GKQ
Site Admin
Posts: 1178
Joined: Sun Mar 22, 2009 1:21 pm

Re: Portsdown Stretch 2019 Software Update 201902250

Post by G8GKQ » Wed Apr 24, 2019 4:18 pm

Hi Gil

Unfortunately, There is no dedicated documentation writer on the project, so sometimes it is not up-to-date. However, if you search the BATC Wiki for "Caption" you will find a few references saying that the caption is not available in H264 modes. It is only available in MPEG-2 modes.

Dave, G8GKQ

Post Reply

Return to “The Portsdown Digital Transmitter Project”