Friedrichshafen 2018

Discussion and Planning for Events and Streaming Activity
Mike-G8DLX
Posts: 7
Joined: Sat Dec 02, 2017 8:12 am

Friedrichshafen 2018

Post by Mike-G8DLX » Sun May 27, 2018 6:51 pm

Hi. Currently about 2 hours from the show site and aiming for the on site camping tomorrow. I wonder if anyone else is aiming to stop on site. I hope to be at the DATV Forum on Friday.

Mike G8DLX

g0mjw
Posts: 573
Joined: Sat Sep 20, 2014 9:15 am

Re: Friedrichshafen 2018

Post by g0mjw » Mon May 28, 2018 3:21 pm

Er - isn't that just a little bit early? It only really starts on Thursday.

I am staying in Immenstaad where I have stayed before. It's a nice little place, only 30 mins by boat from FN, less by road.

Mike

Mike-G8DLX
Posts: 7
Joined: Sat Dec 02, 2017 8:12 am

Re: Friedrichshafen 2018

Post by Mike-G8DLX » Mon May 28, 2018 7:50 pm

Hi. It is early but I intend looking around the area and using it as a base. Should be easy to get into town on by bike. The show is Friday, Saturday and Sunday. There are quite a few on the camping area with aerials set up, I have been working on 6m this evening.

If any members are staying on site pop over & say Hi. I am in a Wildax Panel van Conversion next to the airfield.

Mike

g8gtz
Posts: 975
Joined: Wed Apr 07, 2010 6:26 pm

Re: Friedrichshafen 2018

Post by g8gtz » Tue May 29, 2018 7:53 am

BATC will have a stand at HamRadio 2018 (next door to AGAF) with the normal shop items at reduced prices and there will be a limited Portsdown Clinic available.

There is an ATV conference on Friday at 12 noon local time in the Oesterreich Room which will be streamed live on the new BATC website (details to follow):

HRconf.JPG
HRconf.JPG (32.27 KiB) Viewed 1134 times

Bee good to meet as many members as possible.

73 Noel - G8GTZ

g8gtz
Posts: 975
Joined: Wed Apr 07, 2010 6:26 pm

Re: Friedrichshafen 2018

Post by g8gtz » Wed May 30, 2018 9:17 am

The conference will be streamed live from 12 noon local time - https://batc.org.uk/live/hamradio

oe6rke
Posts: 6
Joined: Wed Apr 03, 2013 3:16 pm

Re: Friedrichshafen 2018

Post by oe6rke » Fri Jun 01, 2018 5:43 pm

thanks for your effort. Looking Forward to the recording if available, thanks in Advance for providing it.

br Robert, 73 de oe6rke

VK5YYY
Posts: 64
Joined: Sun Sep 27, 2015 1:47 am

Re: Friedrichshafen 2018

Post by VK5YYY » Tue Jun 12, 2018 1:04 pm

Hi Folks,

I looked on the Youtube for any videos on Friedrichschafen to play on my show tonight and didn't find much
Is there anyone out there that has video of the event or is there any official BATC footage that could be posted
I doesn't matter if it's a bit raw and suggestions or links gratefully received

Cheers Roger VK5YYY

G4FRE
Posts: 52
Joined: Fri May 26, 2017 6:57 am

Re: Friedrichshafen 2018

Post by G4FRE » Wed Jun 13, 2018 1:01 pm

I have been watching u-tube video of the sdr forum at Friedrichshafen 2018 at https://www.youtube.com/watch?v=Tdi0wjO1UwM. Phil Harman VK6PH is amongst the speakers in the segment 1:00 to 2:30

Dave
G4FRE

g8gtz
Posts: 975
Joined: Wed Apr 07, 2010 6:26 pm

Re: Friedrichshafen 2018

Post by g8gtz » Thu Jun 14, 2018 8:07 am

I have just posted 3 videos from the HamRadio 2018 ATV conference on the BATC youtube channel - https://www.youtube.com/playlist?list=P ... RV_wZO0sbW

Apologies for the production and sound quality as it was done using a PC, VMIX and 2 cameras with no audio feed or screen grab capabilities.

Presentations are also available on this wiki page: https://wiki.batc.org.uk/HAM_RADIO_2018

73
Noel G8GTZ

G8GKQ
Site Admin
Posts: 937
Joined: Sun Mar 22, 2009 1:21 pm

Re: Friedrichshafen 2018

Post by G8GKQ » Fri Jun 15, 2018 3:57 pm

Slides on the Wiki

Apologies for the delay; I have now posted the slides for the Friedrichshafen ATV presentations on the Wiki at https://wiki.batc.org.uk/HAM_RADIO_2018

Dave, G8GKQ

Post Reply

Return to “Events”