DATV Items For Sale

[G8IKP]

Following items built tested and used by me, are now For Sale:

1 x Winterhill Rx in a blue Hammond box no LNB power boards but two blank boards included. Never had the need to use them. £250
1 x Minitiouner in blue Hammond box with the OLED screen and the professional case. Has the NIM fitted but comes with a tested Pico board. The case has been modified to fit either so you can use Toms software and get to the two outputs £85
1 x Cased Ryde receiver currently set up for use with a Samsung TV remote can be changed in the setup to use most TV remotes £75

I'm not supplying any cables or power units but they are easily obtained. Pictures available and shipping at cost.

John G8IKP

[DL5BCA]

Hello John,

i'm interested in

1 x Minitiouner in blue Hammond box with the OLED screen and the professional case. Has the NIM fitted but comes with a tested Pico board. The case has been modified to fit either so you can use Toms software and get to the two outputs £85
1 x Cased Ryde receiver currently set up for use with a Samsung TV remote can be changed in the setup to use most TV remotes £75

Please contact me: dl5bca@darc.de

73 Thomas DL5BCA

[G8IKP]

Have done Thomas, thank you . John G8IKP

[DL5BCA]

Hi John,

thank you so much for the pictures.

I only just started looking into the import duties.
That, combined with shipping, will be too much.

I think I'll build it myself in the spring.

Thanks for your effort.

73 Thomas DL5BCA

[G8IKP]

Thanks Thomas you received my email but didn't reply to my email. I was trying to keep the chat off of the reflector . There will be no customs charges as it would be sent economically, fully tracked as a gift with a very low value . I've priced the items well below the cost of the components but am always open to offers.
73s John G8IKP

[greg]

Following items built tested and used by me, are now For Sale:
1 x Minitiouner in blue Hammond box with the OLED screen and the professional case. Has the NIM fitted but comes with a tested Pico board. The case has been modified to fit either so you can use Toms software and get to the two outputs £85

Hi John
If the Minitiouner is still available I would like to purchase it. I am in Sunderland so please contact me with costs including postage and I will arrange payment immediately.

Many thanks

de M0ODZ
Greg @ IO94GT

[G8IKP]

Have emailed you Greg. John G8IKP

[G8IKP]

The Minitiouner is sold. Still have the Ryde and Winterhill. John G8IKP

[greg]

viewtopic.php?f=13&t=9397

John is a highly recommended seller. Less than a day from ordering and I have the item in my hands.

Top marks

de M0ODZ

Greg