BATC QO-100 Net Controller Rota

Latest News and Discussion about the use of the DATV transponder on Es'hail-2
Post Reply
G8GKQ
Site Admin
Posts: 3024
Joined: Sun Mar 22, 2009 1:21 pm

BATC QO-100 Net Controller Rota

Post by G8GKQ » Thu Jul 31, 2025 7:33 am

It has been proposed that control duties on the BATC QO-100 Thursday evening Net be undertaken by various regular participants on a rota basis. The purpose of this topic is to provide a place for the "duty" rota to be discussed and published.

Please reply and I will fill in the blanks below.

31 July: GU6EFB
7 August: G4XAT
14 August: GU6EFB
21 August: G4XAT
28 August: GU6EFB
4 September: G4SAQ
11 September: G4XAT
18 September: GU6EFB
25 September: GU6EFB
2 October: G4SAQ
9 October: G4XAT
16 October: G4XAT
23 October: GU6EFB
30 October: G4XAT
6 November: GU6EFB
13 November: G4XAT
20 November: G4XAT
27 November: GU6EFB
4 December: G8GKQ
11 December: G4XAT
18 December: G4XAT
25 December: No net
1 January: ??
8 January:
15 January:


73

Dave, G8GKQ

radiogareth
Posts: 1441
Joined: Wed Jan 06, 2016 9:46 am

Re: BATC QO-100 Net Controller Rota

Post by radiogareth » Thu Dec 18, 2025 4:12 pm

My 13cm PA has failed so I'm hoping either Dave or Keith can jump in here and run this evenings (18th Dec) net?
Thanks
Gareth.

g0mjw
Posts: 2715
Joined: Sat Sep 20, 2014 9:15 am

Re: BATC QO-100 Net Controller Rota

Post by g0mjw » Thu Dec 18, 2025 5:41 pm

I am around for once

radiogareth
Posts: 1441
Joined: Wed Jan 06, 2016 9:46 am

Re: BATC QO-100 Net Controller Rota

Post by radiogareth » Fri Dec 19, 2025 12:44 pm

Thanks Mike for filling in.....the fault was 'just' a tiny 50R SM resistor that feeds +28V into the bias chain. It had gone O/C on one of the PA devices.
An easy fix fortunately. Now to address the fan noise, something I should have done a LONG time ago really......on both the amp and the PSU.
Gareth

Post Reply

Return to “Es’hail-2 - DATV Transponder”