DATV-Easy

[G7JTT]

Morning all need some help with DATV-Easy. I recently added a second NVME drive in my laptop. It had a 500Gb, but this was becoming very full. The second NVME is a 1Tb and is faster than the original one, so once I installed it I cloned the smaller drive to the new 1Tb drive. This seemed to go fine and everything I've used has worked fine, except DATV-Easy. The program runs but when you press start the two green LEDs light but the bit rate remains at zero and the lime doesn't initialise (green flashing led). I tried deleting DATV-Easy, both folders and removed all mentions of it in the registry with no change to it's behaviour. I know the lime is working as SDRconsole and SDR++ work fine with it. So I switched back to the old drive and it it worked fine.

Any ideas ?

73 John G7JTT

[G7JTT]

Ok so I bit the bullet this morning and re-cloned the new drive and I'm glad to report DATV-Easy is now working it would still of been nice to know what caused it not to work, but hey who cares it's working again

73 John G7JTT

[Basil]

Sometimes when you "clone" a drive not all files get locked and unlocked files may not copy across successfully.

[G1BVI]

A HUGE sigh of relief John.. you can sleep tonight
N

[G7JTT]

It used to be so easy cloning drives but I guess that's progress ! And yes definitely will be able to sleep tonight

73 John G7JTT