Lime SDR mini, blinking LED

The place to discuss the use of the LimeSDR Mini for amateur TV applications
Post Reply
Posts: 7
Joined: Thu Dec 31, 2020 10:04 am

Lime SDR mini, blinking LED

Post by DL9SDL » Mon Jan 18, 2021 9:58 pm

Hi community,
I am a newbie in this forum.
I purchased the 2020 SD card and this is working in a PI3x with a 3,5" via 26pin connector.
the touch screen displays very fine and I can select the menus.
After having connected the Lime mini at the PI3x´s USB-port I could update firmare 1.29>1.30 and finally to the DVB-firmware, also indicated sucessfully as loaded.
After rebooting the SMD-LED on the Lime mini board is blinking red-green.
Have there benne some mistakes in between ? Is this not the right way to line up ?
USB-hub is still USB2.0, USB3.0 is on the way. Does this make any difference ?
Experienced homespirit could help me to come out this beginners problem.

Vy 53

Post Reply

Return to “LimeSDR Mini”