- Add LKV373A HDMI input for Pluto and streaming outputs
- Add LKV373A HDMI monitor
- Enable 16:9 and 720p H264 modes
- Change IPTS monitor to use VLC
The LKV373A IP address needs to be entered on the Jetson/LKV Config menu, and then it is available as a video source for the Pluto. You will probably need to set the LKV373A to output 720p (HD from FHD when you set up the LKV373A) to achieve resonable results at low SRs. This HDMI input can also be used as a source for the BATC Streamer. You can display the incoming HDMI on the "HDMI Monitor" selectable from Menu 2. You cannot use the HDMI input for LimeSDR or DATV EXpress.
I have enabled some 16:9 and 720p video formats for H264 modes. Again, you need to be sensible about what can be transmitted at low SRs.
The IPTS monitor now uses VLC (rather than omxplayer) and appears to be more reliable.
Please report any bugs here.
Dave, G8GKQ