Ryde receiver pictures?

Discussions about the Ryde "Set-top Box" Style Digital ATV Receiver. See https://wiki.batc.org.uk/Ryde_Receiver
Post Reply
g8gtz
Posts: 1733
Joined: Wed Apr 07, 2010 6:26 pm

Ryde receiver pictures?

Post by g8gtz » Tue Sep 15, 2020 8:00 am

Hi

I'm just finalising the Ryde CQ-TV article and need a few pictures - showing how simple / compact / tidy the Ryde is.

Do you have anything? Posting back means I have permission to use in CQ-TV.

And I can add in any anecdotes / comments you want to make about the project.

73
Noel

g0mjw
Posts: 2330
Joined: Sat Sep 20, 2014 9:15 am

Re: Ryde receiver pictures?

Post by g0mjw » Tue Sep 15, 2020 8:03 am

I could take some pictures of the one I made if you like. Here is one I took earlier
1.jpg
1.jpg (620.16 KiB) Viewed 2808 times
2.jpg
2.jpg (103.33 KiB) Viewed 2808 times

MW0RUD
Posts: 97
Joined: Fri Apr 24, 2020 3:09 pm

Re: Ryde receiver pictures?

Post by MW0RUD » Tue Sep 15, 2020 10:28 am

This is my development setup if that is of interest:
IMG_20200915_092745.jpg
IMG_20200915_092745.jpg (453.52 KiB) Viewed 2789 times
And some screenshots running a more recent version of the software
IMG_20200915_095156.jpg
IMG_20200915_095156.jpg (427.77 KiB) Viewed 2789 times
snapshot.png
snapshot.png (482.19 KiB) Viewed 2789 times

G4KLB
Posts: 244
Joined: Wed May 28, 2008 10:46 am

Re: Ryde receiver pictures?

Post by G4KLB » Wed Sep 16, 2020 5:51 am

Done a couple of Ryde receivers for GB3SQ.

Not necessarily recommending the layout for general use as I have custom PCBs for the front panel and FT2232H module, together with overcurrent protection for the LNB output and an opto isolator for the lock output.
2Ryde.jpg
2Ryde.jpg (92.09 KiB) Viewed 2721 times
IMG_2826.jpg
IMG_2826.jpg (805.71 KiB) Viewed 2721 times
IMG_2830.jpg
IMG_2830.jpg (726.97 KiB) Viewed 2721 times

Post Reply

Return to “The Ryde Digital ATV Receiver”