Hi
I have up a pair of Jaybeam MBM48/70 multi-beams which I intend to put up for 70cm DATV, but have no tech info on these antennae.
Anyone any idea of the coax lenght's required to make a phasing harness
Regards
Col
MBM48/70 Phasing Harness
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: MBM48/70 Phasing Harness
Thanks for the info
Regards
Col
Regards
Col
Re: MBM48/70 Phasing Harness
Colin
There is another way, using a power splitter. I use one here and brought mine on E-Bay from a supplier in Greece. By using a power splitter, you only need to know stacking distance and equal lengths of 50 ohm coax, easier than making up a phasing harness.
P5
Roger G4OCO
There is another way, using a power splitter. I use one here and brought mine on E-Bay from a supplier in Greece. By using a power splitter, you only need to know stacking distance and equal lengths of 50 ohm coax, easier than making up a phasing harness.
P5
Roger G4OCO
Re: MBM48/70 Phasing Harness
I thought that was all I needed to know for a phasing harness, the stacking distance, length of coax's, (75ohm), to the tee socket
regards
Col
regards
Col