just decided if i can connect it to OBS
1st i followed this site to program the module
https://randomnerdtutorials.com/esp32-c ... duino-ide/
while you are adding your wifi ssid and pass.
scroll down and look for
Code: Select all
//drop down frame size for higher initial frame rate
s->set_framesize(s, FRAMESIZE_QVGA);
Code: Select all
//drop down frame size for higher initial frame rate
s->set_framesize(s, FRAMESIZE_SVGA);
choices are
160x120 (QQVGA)
128x160 (QQVGA2)
176x144 (QCIF)
240x176 (HQVGA)
320x240 (QVGA)
400x296 (CIF)
640x480 (VGA, default)
800x600 (SVGA)
1024x768 (XGA)
1280x1024 (SXGA)
1600x1200 (UXGA)
one you have programmed the device and have its IP address you can use your browser to go to the server the stream address is http://YOUR_DEVICE_IP:81/stream
in OBS add a scene and in that scene add source and select browser in the URL input http://YOUR_DEVICE_IP:81/stream
you can play around wiht the frame size to suit
what my obs look like the esp32cam on the left this is not a step by step guide. but it may help members who like to play