Hi,
I am using
vMIX
Batch file “Feb 2019 by Evariste F5OEO - QO-100 Release 0.9” This I have found to be excellent.
Portsdown Transmitter
Lime Mini SDR
Computer Dell i5 Windows 10 Pro 64BIT 8GB Ram.
When I run the batch file get the error:-
Thread message queue blocking: consider raising the thread_queue_size option (current value: 8)
My programming knowledge is very limited.
Is this something that should concern me?
If so how do I correct it.
I am getting good results even with the error.
Hope you can help.
73’s
Martin
G8KOE
FFmpeg HELP
Re: FFmpeg HELP
Hi Martin
If you are getting good results I would hesitate to change anything. It's certainly not doing any harm.
I have tried curing this error in the past by increasing the thread_queue_size (can't remember how), but it did not improve the transmitted picture noticeably.
Dave, G8GKQ
If you are getting good results I would hesitate to change anything. It's certainly not doing any harm.
I have tried curing this error in the past by increasing the thread_queue_size (can't remember how), but it did not improve the transmitted picture noticeably.
Dave, G8GKQ
Re: FFmpeg HELP
Hi Dave,
Thanks for quick reply.
On intense sound can get some breakup didn't know if this may not be connected.
I will keep testing.
73's
Martin
G8KOE
Thanks for quick reply.
On intense sound can get some breakup didn't know if this may not be connected.
I will keep testing.
73's
Martin
G8KOE