18v h power
Re: 18v h power
Hi all,
I just added an EBay buck converter and a centre off dpdt switch into my Minitiouner, the switch simply puts 12v or 18v to the pcb pin that feeds lnb power to the NIM.
73 Dave.
I just added an EBay buck converter and a centre off dpdt switch into my Minitiouner, the switch simply puts 12v or 18v to the pcb pin that feeds lnb power to the NIM.
73 Dave.
- Attachments
-
- IMG-20190424-WA0000.jpeg (1.05 MiB) Viewed 5895 times
...are you sure I can't use a pair of 813's?...
Re: 18v h power
I've never had any luck with those Buck converters, they seem to cause a lot of QRM, especially on the 2m band.
Re: 18v h power
Don't need the buck converter on 2m, only for 18v, that's why it's on a centre off switch. Because the 12v feed is direct from the incoming supply it can also feed a preamp on 2m and 70cm, win win. I always add extra filtering to the converter too.
Don't forget the RT5047 is also a buck converter.
Don't forget the RT5047 is also a buck converter.
...are you sure I can't use a pair of 813's?...
Re: 18v h power
I really need one of these! The problem is that I no longer have the eyes or the manual security to build one myself. Can anyone direct me to a 'ready made' solution?
TiA and 73, David G4NRT
Re: 18v h power
Hi David, Richtek make an evaluation board (Digi-Key Part Number EVB_RT5047GSP-ND) that can be used with the Minitioune and controlled with the latest software. It’s expensive for what it is, but saves the eye strain.
73's John M0IVJ
73's John M0IVJ
Re: 18v h power
Thanks John. I shall check it out.
David G4NRT
David G4NRT
Re: 18v h power
Working on a version that fits the standard V2 box ........ watch this space.
This one is configured for testing the various options, more info to follow.
If all goes well should find the PCB in the BATC shop, some minor rework to make construction easier after testing is complete.
This one is configured for testing the various options, more info to follow.
If all goes well should find the PCB in the BATC shop, some minor rework to make construction easier after testing is complete.
Re: 18v h power
Almost ready with our version to fit the standard V2.0 case
(Someone forgot to specify blue boards on this prototype)
(Someone forgot to specify blue boards on this prototype)