Global Invacom SNF-031 LNB - PLL?
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Global Invacom SNF-031 LNB - PLL?
I'm using an old Global Invacom SNF-031 C120 Single Universal LNB on my 1.2M dish, I'm pretty sure it's PLL type, but can't find a spec. sheet stating so. Given that I'm not having any problems with SR1000 and over signals on Es'hail-2 but yet to receive anything below that rate, I'm beginning to wonder if that could be the cause.
Last edited by G4GHD on Fri Mar 01, 2019 1:48 pm, edited 1 time in total.
Re: Global Invacom SNF-031 LNB - PLL?
It is definitely a DRO LNB and not a PLL
Re: Global Invacom SNF-031 LNB - PLL?
Many thanks.
Any recommendations on a C120 flange PLL LNB?
Any recommendations on a C120 flange PLL LNB?
Re: Global Invacom SNF-031 LNB - PLL?
I do not know of any C125 PLL LNBs. I have a C120 channel master horn on my 1.2m dish.
I used an octagon and a surplus c120 horn. I cut the horn off the octagon and the flange off the old horn. Joined the LNB and Flange.
Mike
I used an octagon and a surplus c120 horn. I cut the horn off the octagon and the flange off the old horn. Joined the LNB and Flange.
Mike
Re: Global Invacom SNF-031 LNB - PLL?
Ah, I was hoping there'd be a PLL version, not sure my metalwork skills are up to your solution.
Re: Global Invacom SNF-031 LNB - PLL?
Metalwork skills? A hacksaw, areldite and a hose clamp for a bit of mechanical reinforcement?
Re: Global Invacom SNF-031 LNB - PLL?
I didn't realise you'd simply glued them together, doesn't sound too difficult then...