BATC shop - PCBs back in stock
BATC shop - PCBs back in stock
Following a large (delayed) order from China all the PCBs are back in stock, including 71MHz rxr converter, MiniTiouner and Portsdown LO filter PCBs.
Enjoy
Enjoy
Re: BATC shop - PCBs back in stock
Phew, managed to catch the converters this time.
Thanks.
73 Dave M5TXJ
Thanks.
73 Dave M5TXJ
...are you sure I can't use a pair of 813's?...
Re: BATC shop - PCBs back in stock
Are there any plans to restock 71MHz rx upconverter PCB?
Steve
Steve
Find me on D Star through GB7BP
Re: BATC shop - PCBs back in stock
Yes, I'll order some with the next batch of PCBs which will probably be before Christmas, depending on how other PCBs sell...
Noel
Noel
Re: BATC shop - PCBs back in stock
Hi Mike,
Yes I bought one of the first batch of boards; I finished it the same week and I've used it a couple of times.
MER is a couple of dB lower than the G4CPE special but I think it's just as sensitive. Arthur fitted a narrow amplified SAW filter to the one he built so it has a flying start.
Very happy with it thanks.
Thanks Noel; I'll watch the shop.
73 Steve
Yes I bought one of the first batch of boards; I finished it the same week and I've used it a couple of times.
MER is a couple of dB lower than the G4CPE special but I think it's just as sensitive. Arthur fitted a narrow amplified SAW filter to the one he built so it has a flying start.
Very happy with it thanks.
Thanks Noel; I'll watch the shop.
73 Steve
Find me on D Star through GB7BP
Re: BATC shop - PCBs back in stock
Will the G4FRE LED Power Indicator PCB get amended at all as the layout isn't correct and there is a track/pad missing?
Also it would be nice if the accompanying RF Detector PCB was available to purchase too for this project.
Also it would be nice if the accompanying RF Detector PCB was available to purchase too for this project.