Friedrichshafen 2018
-
- Posts: 9
- Joined: Sat Dec 02, 2017 8:12 am
Friedrichshafen 2018
Hi. Currently about 2 hours from the show site and aiming for the on site camping tomorrow. I wonder if anyone else is aiming to stop on site. I hope to be at the DATV Forum on Friday.
Mike G8DLX
Mike G8DLX
Re: Friedrichshafen 2018
Er - isn't that just a little bit early? It only really starts on Thursday.
I am staying in Immenstaad where I have stayed before. It's a nice little place, only 30 mins by boat from FN, less by road.
Mike
I am staying in Immenstaad where I have stayed before. It's a nice little place, only 30 mins by boat from FN, less by road.
Mike
-
- Posts: 9
- Joined: Sat Dec 02, 2017 8:12 am
Re: Friedrichshafen 2018
Hi. It is early but I intend looking around the area and using it as a base. Should be easy to get into town on by bike. The show is Friday, Saturday and Sunday. There are quite a few on the camping area with aerials set up, I have been working on 6m this evening.
If any members are staying on site pop over & say Hi. I am in a Wildax Panel van Conversion next to the airfield.
Mike
If any members are staying on site pop over & say Hi. I am in a Wildax Panel van Conversion next to the airfield.
Mike
Re: Friedrichshafen 2018
BATC will have a stand at HamRadio 2018 (next door to AGAF) with the normal shop items at reduced prices and there will be a limited Portsdown Clinic available.
There is an ATV conference on Friday at 12 noon local time in the Oesterreich Room which will be streamed live on the new BATC website (details to follow):
Bee good to meet as many members as possible.
73 Noel - G8GTZ
There is an ATV conference on Friday at 12 noon local time in the Oesterreich Room which will be streamed live on the new BATC website (details to follow):
Bee good to meet as many members as possible.
73 Noel - G8GTZ
Re: Friedrichshafen 2018
The conference will be streamed live from 12 noon local time - https://batc.org.uk/live/hamradio
Re: Friedrichshafen 2018
thanks for your effort. Looking Forward to the recording if available, thanks in Advance for providing it.
br Robert, 73 de oe6rke
br Robert, 73 de oe6rke
Re: Friedrichshafen 2018
Hi Folks,
I looked on the Youtube for any videos on Friedrichschafen to play on my show tonight and didn't find much
Is there anyone out there that has video of the event or is there any official BATC footage that could be posted
I doesn't matter if it's a bit raw and suggestions or links gratefully received
Cheers Roger VK5YYY
I looked on the Youtube for any videos on Friedrichschafen to play on my show tonight and didn't find much
Is there anyone out there that has video of the event or is there any official BATC footage that could be posted
I doesn't matter if it's a bit raw and suggestions or links gratefully received
Cheers Roger VK5YYY
Re: Friedrichshafen 2018
I have been watching u-tube video of the sdr forum at Friedrichshafen 2018 at https://www.youtube.com/watch?v=Tdi0wjO1UwM. Phil Harman VK6PH is amongst the speakers in the segment 1:00 to 2:30
Dave
G4FRE
Dave
G4FRE
Re: Friedrichshafen 2018
I have just posted 3 videos from the HamRadio 2018 ATV conference on the BATC youtube channel - https://www.youtube.com/playlist?list=P ... RV_wZO0sbW
Apologies for the production and sound quality as it was done using a PC, VMIX and 2 cameras with no audio feed or screen grab capabilities.
Presentations are also available on this wiki page: https://wiki.batc.org.uk/HAM_RADIO_2018
73
Noel G8GTZ
Apologies for the production and sound quality as it was done using a PC, VMIX and 2 cameras with no audio feed or screen grab capabilities.
Presentations are also available on this wiki page: https://wiki.batc.org.uk/HAM_RADIO_2018
73
Noel G8GTZ
Re: Friedrichshafen 2018
Slides on the Wiki
Apologies for the delay; I have now posted the slides for the Friedrichshafen ATV presentations on the Wiki at https://wiki.batc.org.uk/HAM_RADIO_2018
Dave, G8GKQ
Apologies for the delay; I have now posted the slides for the Friedrichshafen ATV presentations on the Wiki at https://wiki.batc.org.uk/HAM_RADIO_2018
Dave, G8GKQ