Require PIC Firmware - 13cms G1MFG TV Modules

[G6YBC]

Hi All

Understand there is PIC Firmware to alter the Frequency setting of the 13 cms G1MFG TV transmitter modules.

Wish to connect to a X 4 multiplier so to enable operation on 10.xx GHz TV

Thank you for any possible help

Dennis G6YBC

[ON1AVO]

Dennis,

Have a look at http://www.lechner-cctv.de/frequenzdisp ... 7eraasv3h0
It is in German but a full description of the PCB and Hex files.

73's
Freddy

[g8gtz]

Hi Dennis

Peter, G3PYB, has the code and sells the programmed PICs on behalf of GB3IV. I'll copy this post to him.

Noel

[g8gtz]

Hi Dennis

Drop Peter an email - "g3pyb at btinternet.com" - he has the hex or can supply you a PIC.

Noel

[g3rfl]

Hello Dennis
Names John G3RFL up in CLEVELEYS years ago I programmed a PIC to do exactly what you want to do and from memory came across a problem the varicap volts needed to be made higher so that the VCO tuning caps go to a minimum value I do have a multiplier I never use now and a tunable MFG TX I never use now fully tunable freq wise with readout I now use YIGs direct on line tunable with a constasnt current...So if you get stuck...g3rfl@talktalk.net TTFN P5 GB3FY