Raspberry Pi, DigiThin and Si570 Configuration Procedure

The place for discussion about the RPi add-on RB-TV modulator card developed by G4EWJ and supported by the BATC Shop
User avatar
G0NMY
Posts: 99
Joined: Wed Nov 11, 2009 6:10 pm

Re: Raspberry Pi, DigiThin and Si570 Configuration Procedure

Post by G0NMY » Sun Nov 06, 2016 10:23 pm

- Modify some config files as superuser using the nano text editor:

"sudo nano /etc/modules"
Use the arrow keys to go down and add the lines:
i2c-bcm2708
12c-dev
Save and Exit by pressing Ctrl-X, Y, Enter
should the above be i2c-dev

I know this is an old post but maybe why the oscillator script errors out ?? :)
   

   

http://www.g0nmy.blogspot.co.uk/

¡ʎɐqƎ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq I ǝɯᴉʇ ʇsɐl ǝɥʇ sᴉ sᴉɥʇ

G8GKQ
Site Admin
Posts: 2794
Joined: Sun Mar 22, 2009 1:21 pm

Re: Raspberry Pi, DigiThin and Si570 Configuration Procedure

Post by G8GKQ » Wed Nov 30, 2016 10:03 pm

Mark

You are correct. I have corrected my original post. Thanks

Dave, G8GKQ

g0mjw
Posts: 2311
Joined: Sat Sep 20, 2014 9:15 am

Re: Raspberry Pi, DigiThin and Si570 Configuration Procedure

Post by g0mjw » Wed Aug 28, 2019 4:07 pm

I am trying to get my old PI2 and digithin working but when I select it from the menu it says it is not supported. The old instructions are out of date and links no longer work. I think there is little needs to be done apart from setting the si570 and IQ outputs. It would be good to be able to use it again.

Mike

Post Reply

Return to “DigiThin”