The place for discussion about the RPi add-on RB-TV modulator card developed by G4EWJ and supported by the BATC Shop
- Posts: 76
- Joined: Wed Nov 11, 2009 6:10 pm
- Modify some config files as superuser using the nano text editor:
"sudo nano /etc/modules"
Use the arrow keys to go down and add the lines:
Save and Exit by pressing Ctrl-X, Y, Enter
should the above be i2c-dev
I know this is an old post but maybe why the oscillator script errors out ??
- Site Admin
- Posts: 1687
- Joined: Sun Mar 22, 2009 1:21 pm
You are correct. I have corrected my original post. Thanks
- Posts: 1172
- Joined: Sat Sep 20, 2014 9:15 am
I am trying to get my old PI2 and digithin working but when I select it from the menu it says it is not supported. The old instructions are out of date and links no longer work. I think there is little needs to be done apart from setting the si570 and IQ outputs. It would be good to be able to use it again.