Raspberry Pi 2

The place for discussion about the RPi add-on RB-TV modulator card developed by G4EWJ and supported by the BATC Shop
G4KLB
Posts: 244
Joined: Wed May 28, 2008 10:46 am

Re: Raspberry Pi 2

Post by G4KLB » Sun Nov 08, 2015 12:51 am

Just finished my DigiThin for the Pi 2
I fitted a 100R resistor in LK4 ('I' input)
and 100R resistor in LK 2 ('Q' input)

That is exactly the same as a Model 'B'

The 'Q' signal on a Rpi 2 is available on pin 35 of the header, so the only 'Mod' needed was to connect pin 23 and pin 35 together on the Pi itself.

If you plan to use the pi for other uses, look at Dave's posts above.

Post Reply

Return to “DigiThin”