Page 1 of 1

BATC shop - Knucker DVB-T tuner parts

Posted: Sat Feb 27, 2021 9:23 am
by g8gtz
We currently have 400 of the Serit 4762 NIM on order and due for delivery in the next 2 weeks - early March.

So you can now get ahead and start building the rest of the hardware, the PCB and USB module are now available in the shop.

https://batc.org.uk/category/usb-receivers/

Note the USB module is the same module but programmed differently from the MiniTiouner USB module. When buying the module there is now an option to choose the version you require.

https://batc.org.uk/shop/minitiouner-us ... ce-module/

BOM and schematic for the board are on the wiki: https://wiki.batc.org.uk/Knucker

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Sat Feb 27, 2021 9:47 am
by FRANCOIS F1CHF
hello
the data for the tuner is password protected
I am logged as F1CHF
here
https://batc.org.uk/shop/serit-ftm-4762-nim/

thanks

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Sat Feb 27, 2021 10:03 am
by g0mjw
That is because it is not yet in stock and not available to order.

Mike

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Sat Feb 27, 2021 10:21 am
by g8gtz
Thanks Mike!

You can't order it if we don't have it!!

73

Noel - G8GTZ

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Tue Mar 16, 2021 5:51 pm
by g8gtz
Update from Serit - the 4762 tuners will be shipped early next week (22nd March) from China so should be available in the BATC shop within next 2 weeks.

Still in time for the Sporadic E season :-)

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Sat Mar 27, 2021 9:01 am
by g8gtz
The Serit 4762 NIMs have arrived and are in the shop.

We have had 30 orders overnight but don't panic - we have a lot of them.

However, it will take a few days to clear the backlog of orders and get them to the Post Office so please be patient.

More of the Knucker and MiniTiouner PCBs are on order and due next week.

73's Noel

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Wed May 05, 2021 3:12 pm
by g3yjr
Noel,

I just ordered a Knucker board & parts. I missed the extra selection box for the USB module, so might that be amended to be the Knucker firmware version?

I'm guessing the parts list for populating the Knucker board will be similar to Minitiouner2, but is there a current list for the board?

Thanks for your help.

73 Graham

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Wed May 05, 2021 3:32 pm
by g8gtz
Hi Graham

No problem - I've just been to the PO so may not go out until Friday.

A circuit (schematic) and parts list are available here: https://wiki.batc.org.uk/Knucker#Version_3

73

Noel

Re: BATC shop - Knucker DVB-T tuner parts

Posted: Wed May 05, 2021 4:48 pm
by g3yjr
No rush; I have too many projects as it is!

Thanks for the link. I had already read that & saw only the schematic & completely missed the BoM link. The brain cells don't fire like they used to...

73 Graham