Serit 4434 NIM back in stock!

The place for announcements on the latest stock items and for your feedback on items that you would like to see in stock
Post Reply
g8gtz
Posts: 1596
Joined: Wed Apr 07, 2010 6:26 pm

Serit 4434 NIM back in stock!

Post by g8gtz » Fri Apr 22, 2022 12:37 pm

DHL has just delivered 400 Serit NIMs for the BATC shop :-)

Note that shipping may be delayed as I am currently testing positive for Covid-19 and unable to visit the Post Office but will despatch any orders as soon as possible.

73

Noel - G8GTZ

g0mjw
Posts: 1858
Joined: Sat Sep 20, 2014 9:15 am

Re: Serit 4434 NIM back in stock!

Post by g0mjw » Fri Apr 22, 2022 3:59 pm

Great news, though very sorry to hear about the continuing positive test.

The WinterHill project has a problem as the Murata OKR-T/3-W12-C switching regulators are not in stock at the moment and have silly lead times.
Clipboard01.jpg
Clipboard01.jpg (332.26 KiB) Viewed 931 times
The temporary solution is to construct 5.1V, 3.3V and 1.1V supplies external to the board and feed them in via the header highlighted where there is also access to the input supply and ground. Those could be Ebay modules or simple switchers with 3A capability.

Mike

Edit - I see Digikey have the 6A versions currently in stock, Part Number 811-2179-ND a little excessive but they are theoretically drop in replacements.

PE1CHY
Posts: 7
Joined: Mon Aug 17, 2020 1:10 pm

Re: Serit 4434 NIM back in stock!

Post by PE1CHY » Mon Apr 25, 2022 6:11 pm

Hi,

I would like to build the Winterhill recever project. I already have a PCB, but no tuners.
They are back in stock, but i can order only one.
I understand that they are only in limited quantities available, but how to get two for the Winterhill??
Rob
PE1CHY

g8gtz
Posts: 1596
Joined: Wed Apr 07, 2010 6:26 pm

Re: Serit 4434 NIM back in stock!

Post by g8gtz » Mon Apr 25, 2022 6:55 pm

Maximum quantity per order increased to 4 - enough for 2 winterhills!

73

Noel - G8GTZ

PE1CHY
Posts: 7
Joined: Mon Aug 17, 2020 1:10 pm

Re: Serit 4434 NIM back in stock!

Post by PE1CHY » Mon Apr 25, 2022 7:36 pm

Hi Noel,

Many thanks,
Order succesfully placed
Rob
PE1CHY

Post Reply

Return to “BATC Shop”