Boots in a loop

Help and support for the BATC DTX1 ATV digital encoder and modulator system
Post Reply
rdklein
Posts: 3
Joined: Wed Feb 05, 2014 7:22 am

Boots in a loop

Post by rdklein » Sat Feb 08, 2014 11:30 am

I just built my DTX1, I have also added the 2nd encoder.

After power on, it says loading (0) OK, then loading (1) OK,
then FPGA FFFF.. License: and then the display gets dark and same starts over again.


Anything wrong,? No signals are connected at this stage. Do I need to upload firmwar first ?

73
dm7rdk

2E0DTX
Posts: 45
Joined: Thu Oct 03, 2013 6:32 pm

Re: Boots in a loop

Post by 2E0DTX » Sat Feb 08, 2014 2:18 pm

Hi - sounds like your unit isn't functioning properly -

Best to email support@dtx1.info directly.

73's

Post Reply

Return to “BATC DTX1”