I got my Bullseye 10 Khz inside. Now I want to mount that lnb on a Gregorian dish. it is possible to remove the feedhorn from the lnb and then mount the lnb to the feedhorn of the Gregorian.
mvg
Help wanted.
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
-
radiogareth
- Posts: 1236
- Joined: Wed Jan 06, 2016 9:46 am
Re: Help wanted.
Can you post some pictures of what you have?
As far as I know, you could mount the LNB where the existing reflector is, or using some suitable copper or aluminium pipe, fit the LNB at the back by drilling a hole in the RED cap and just pushing the pipe into the LNB throat.
Gareth
As far as I know, you could mount the LNB where the existing reflector is, or using some suitable copper or aluminium pipe, fit the LNB at the back by drilling a hole in the RED cap and just pushing the pipe into the LNB throat.
Gareth
-
thedvbdreamer1
- Posts: 26
- Joined: Wed Aug 16, 2023 2:45 pm
Re: Help wanted.
Have done it now,but have more pictures
- Attachments
-
- IMG_20231010_173752.jpgverkleint.jpg (484.5 KiB) Viewed 7087 times
-
thedvbdreamer1
- Posts: 26
- Joined: Wed Aug 16, 2023 2:45 pm
Re: Help wanted.
It works for the satellite, I have a picture.
Now for the amateur footage.
any help is welcome.
Best regards
Now for the amateur footage.
any help is welcome.
Best regards