Hi
I am trying to send a stream output from my computer using either vmix or obs to my portsdown to then transmit it. I have managed to get as far as external output from vmix and then understand that vmix needs to be used to stream it. ( is that udp it?) - then it starts to become a little grey in my understanding.
Can anyone point me to an article that explains it or what I need to do please?
Thanks
Steve
G8XPZ
Sending an output stream to the Portsdown for TX
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Sending an output stream to the Portsdown for TX
Hi Steve
Hopefully it is all on the Wiki: https://wiki.batc.org.uk/IPTS_Input_to_ ... he_LimeSDR
Dave, G8GKQ
Hopefully it is all on the Wiki: https://wiki.batc.org.uk/IPTS_Input_to_ ... he_LimeSDR
Dave, G8GKQ
Re: Sending an output stream to the Portsdown for TX
Thanks Dave - I have been to the article and tried the batch file in the past but struggled to get it working. I'll print the article and follow it one stage at a time and see how I get on.
many thanks
Steve G8XPZ
many thanks
Steve G8XPZ
Re: Sending an output stream to the Portsdown for TX
Steve
If you want to try an OBS solution that doesn't need batch files look here: https://wiki.batc.org.uk/OBS_-_Open_Broadcast_Studio
Works with a Lime or Pluto connected to a Portsdown.
The step by step instructions have been used twice successfully that I know of.
73
Clive G3GJA
If you want to try an OBS solution that doesn't need batch files look here: https://wiki.batc.org.uk/OBS_-_Open_Broadcast_Studio
Works with a Lime or Pluto connected to a Portsdown.
The step by step instructions have been used twice successfully that I know of.
73
Clive G3GJA