Complete built up Portsdown 3 system

Locked
G4WIM
Posts: 379
Joined: Thu Jan 29, 2015 8:36 pm

Complete built up Portsdown 3 system

Post by G4WIM » Tue Jun 07, 2022 7:04 pm

Uses RPI3 and full set of BATC PCB's - nicely assembled (imho) in plastic case with metal front and rear panels - 250mm wide, 94mm high and 175mm deep

BATC PCB's comprise:

IQ modulator
LO synth
LO filter
RF output band switch
LED band status indicator
GPIO extender

Has built in dongle for video capture, RTL rx dongle and connectors on front and rear for all essential signals (assorted RF signals via SMA, HDMI Picam, USB, Ethernet, audio & video ).

It has three built in SMPS's (filtered) to provide power - runs from 12V DC

Can provide photo's external and internal if interested.

Asking £150 plus postage.

Will ship within the UK only.

Please PM me if interested.

Regards Tim

G4WIM
Posts: 379
Joined: Thu Jan 29, 2015 8:36 pm

Re: Complete built up Portsdown 3 system Pictures

Post by G4WIM » Wed Jun 08, 2022 10:11 am

I've been asked for some pictures so I've posted them here.
Attachments
pd_rear.jpg
pd_rear.jpg (36.16 KiB) Viewed 2784 times
pd_inside.jpg
pd_inside.jpg (71.47 KiB) Viewed 2784 times
pd_front.jpg
pd_front.jpg (35.94 KiB) Viewed 2784 times

Drgordon
Posts: 17
Joined: Wed Jun 01, 2022 7:51 pm

Re: Complete built up Portsdown 3 system

Post by Drgordon » Fri Jun 10, 2022 5:04 am

Hi Tim,
I am interested , If still available I can be reached at g_j_bowhay@btinternet.com. Look forward to hearing from you.
Best wishes, Gordon

G4WIM
Posts: 379
Joined: Thu Jan 29, 2015 8:36 pm

Re: Complete built up Portsdown 3 system

Post by G4WIM » Fri Jun 10, 2022 7:43 pm

Sold to Gordon

Locked

Return to “For Sale Ads Archive”