BATC Forum

Hi
I'm offering my Pyro Jo 2.4GHz 30 watt out for 5mW drive PA already mounted on fan cooled heatsink with 12 volt 200 watt Meanwell PSU.

The PA cost £160, heatsink £25, PSU £26 and three 50mm fans £12 cost to me all in £223 - so will sell for £200

Works great thru Oscar 100 and using my 1.2M dish has supported 500kS at 100% duty cycle - ideal amplifier for use with a Lime exciter.

Note, the PSU is seperate to the PA so will need a chassis plate or enclosure.

Prefer buyer collects from IO83NS

Please PM me if interested

Regards Tim

Hi Tim

What power do you get at 2,400Mhz ?

Thanks

Dave

Hi Dave

using my Agilent power meter with cw drive it can easily exceed 30 watts at 2407MHz but I have never run it at more than 10 amps DC input as recommended at which level it produces just shy of 30 watts - I'd have to repeat the measurement to be sure.

It has been 'snow flaked' but interestingly it came marked as 30 watts on the cover from Pyro Jo.

If time permits today I'll post some photos of it, possibly running into watt meter.

Regards Tim

.
That is a bargain !

Would be interested if to see the snowflake mod, but this is a sales thread and anyone wanting one of these should go for it. The latest batch are only 20W, mine is 26W (unmodified).

Regards

Dave

reduced £180

now sold.