Update to BATC Repeater Controller

Ideas, technical topics, help and discussion for ATV repeater builders
Post Reply
G8GKQ
Site Admin
Posts: 2440
Joined: Sun Mar 22, 2009 1:21 pm

Update to BATC Repeater Controller

Post by G8GKQ » Wed May 25, 2022 8:12 pm

I have added the facility to sound an "Announce Bleep" when a signal is detected and the repeater is switching to it.

For those of you already running the controller, go into the SSH Console Menu and perform an update (202205250); no need to take the factory reset config file and lose all your settings. Then, if you want to enable the "Announce Bleep", manually edit the config file by adding this text:

Code: Select all

# Announce bleep info
announcebleep=on
announcebleeplevel=85
announcebleeppitch=600

Ideally between the K info and the Carousel info, at about line 138.

Then restart the repeater software and it should be there.

Comments here please!

Dave, G8GKQ

Post Reply

Return to “ATV Repeater Technical Topics”