A place for ATV enthusiasts to get together and discuss all things Television. NOTE - all postings remain the copyright of the author, please get their permission before publishing elsewhere
How are you generating DATV on 5.7? IIRC the Pluto DATV software had a 32bit overflow that was limiting its top end above 4.3GHz.....
SLight chance of being able to go out /P for at least 2M RX....timings dependant....
Gareth
I hope to be set up and ready to operate between 2:30 and 3 pm (Tuesday 5 April). Exact location will be IO91EA27.
My 5.7 GHz DATV is from a single/double conversion homebrew transverter. The first LO is 4.2 GHz giving me a first IF of 1560 MHz. I use this for DATV transmit from a LimeSDR, and DATV receive with a MiniTiouner. The second LO is 1130 MHz giving a 430 MHz second IF to use with an FT-790 for SSB and NBFM. Design choices driven by filters from the junk box and the upper frequency limit of the ADF4351 first LO.
The PA and preamp can be switched to the WBFM analog ATV drone kit in the same box. About 10W output on both 5.6 and 5.7 GHz.
Still a slight chance of me making it out to play on RX, subject to trains and pickup times. Just managed to TX 'cross-town' on 70cms with Justin with a bit spare, co-linear to colinear. Nokia Dolphin amp this end.
Gareth