Amp boards
Amp boards
Hi All,
Just seen these on ebay:
120810260202
They need ~100mW drive for 2Watts output 23/13cm.
You would need another mmic beforehand to get more drive level from the digilite but could be useful to someone.
73
Rob
Just seen these on ebay:
120810260202
They need ~100mW drive for 2Watts output 23/13cm.
You would need another mmic beforehand to get more drive level from the digilite but could be useful to someone.
73
Rob
Re: Amp boards
Also noticed that board a few days back Rob, the actual auction states it is for the board & MMIC device, seems you have to add the extra parts yourself, no mention of the specs of these parts, was thinking of ordering one but was put off by this.
Re: Amp boards
Hi Tony,
if you email Chuck he'll send you some details. Not many extra components needed but they are all 0603 devices (10 caps and 2 inductors ) so " challenging " to solder, lol. Remember L5 on the DigiLite board?
73
Malc
if you email Chuck he'll send you some details. Not many extra components needed but they are all 0603 devices (10 caps and 2 inductors ) so " challenging " to solder, lol. Remember L5 on the DigiLite board?
73
Malc
Re: Amp boards
Cheaper from Rf Bay
160445927901 2boards £8-50
160391561412 2 FET's £7-30
£15.80 ish as opposed to £16 ish for single board and FET
no connection with either supplier.
Dave
G0MXW
160445927901 2boards £8-50
160391561412 2 FET's £7-30
£15.80 ish as opposed to £16 ish for single board and FET
no connection with either supplier.
Dave
G0MXW
Re: Amp boards
g0uhy wrote:Hi Tony,
if you email Chuck he'll send you some details. Not many extra components needed but they are all 0603 devices (10 caps and 2 inductors ) so " challenging " to solder, lol. Remember L5 on the DigiLite board?
73
Malc
Hi Malc, don't think I'll ever forget L5 !!, I think I may give it a try depending on what info Chuck can provide, after L5 how hard can it be HI !!
Re: Amp boards
How about a Mini-kits EME162-1200 KIT from Oz, 0.5W out for 10mW I/P
regards
Col
regards
Col