Page 1 of 1

HDMI to BATC Streamer

Posted: Sun Mar 14, 2021 4:28 pm
by G8KWR
Is there any software around for a Pi (or perhaps better a Jetson??) with an HDMI dongle to take an input from my DATV receiver (local repeater) and stream it to the BATC streamer. Have tried a Chinese H.264/H.265 encoder box, but that is extremely hit and miss. At the moment I am doing it with VMIX and an HDMI dongle on a Windows machine. Works fine, but it means the Windows machine is is on 24/7. I need something dedicated that I can leave unattended that just works.

Any ideas gratefully received.

Thank you

Roger

Re: HDMI to BATC Streamer

Posted: Sat Jun 19, 2021 9:01 pm
by Pa3fbx
A bit late but currently working on the same problem.

I have a LinkPi witch dous just that..
stream HDMI to a pluto and the internet...
Just not the BATC streaming service jet..

Benno

Re: HDMI to BATC Streamer

Posted: Sun Jun 20, 2021 5:45 am
by G7JTT
Hi Roger,

One way to do it would be install OBS on the jetson, with a USB HDMI capture device. Then setup OBS to stream to the BATC in the normal way.

I used to use the Jetson to run OBS, LongMynd and encode H265 then stream to the Portsdown. So just streaming to the BATC should be fine.

All best John G7JTT

Re: HDMI to BATC Streamer

Posted: Sun Jun 20, 2021 5:49 am
by G7JTT
Sorry forgot to post the link to installing OBS on the Jetson

https://qiita.com/kitazaki/items/3950c48a68bab1766fb6

73 John G7JTT