I just installed Larix broadcaster on my mobile phone and tried to configure it to stream to batc.
sadly it doesnt like the address rtmp://rtmp.batc.org.uk/live I think its looking for an ip-address and port number.
Any ideas?
Cheers Mark
Larix Broadcaster stream to batc?
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Larix Broadcaster stream to batc?
In the Connection URL rtmp://rtmp.batc.org.uk/live you need to add your streamname-stream key
example
rtmp://rtmp.batc.org.uk/live/Gxxxx-abcde
That is all I did and it worked !
Depending on your phone you may well have to drop frame rate and video size, the default settings for my Moto G5 gave VERY jerky movements. 640 x 480 and frame rate of 7-20 is reasonable. Just experiment.
Bob
example
rtmp://rtmp.batc.org.uk/live/Gxxxx-abcde
That is all I did and it worked !
Depending on your phone you may well have to drop frame rate and video size, the default settings for my Moto G5 gave VERY jerky movements. 640 x 480 and frame rate of 7-20 is reasonable. Just experiment.
Bob
Re: Larix Broadcaster stream to batc?
Was able to send and receive GB3HV using my Huawei P20 Pro and the split screen option works well
https://twitter.com/G7Jtt/status/122538 ... 21792?s=19
John G7JTT
https://twitter.com/G7Jtt/status/122538 ... 21792?s=19
John G7JTT