Transitioning to new streamer
Posted: Wed Jun 06, 2018 8:03 pm
Hi,
I have latest image on my rpi and I'm attempting to set up the new streamer for gb3ft and I have the new credentials etc, but when I follow this guide :
https://wiki.batc.org.uk/Configuring_your_channel
and start / reboot the constant streamer nothing appears on the streamer website plus I get this in the terminal:
Starting stream
after crashing in the hour after 07 o'clock
or sometimes this
Starting stream
after crashing in the hour after 08 o'clock
I also note that when I do the below it then asks me for the stream key again
Enter your stream name (callsign) in lower case, followed by a hyphen and then the 6 character stream key. For example g8gkq-abcxyz
Press enter to get back to the main menu.
So I've tried entering just the callsign with no hyphen key and then entered the key when it asks for it - still no joy.
Any pointers as to what I've done wrong ?
I have selected streamer in output type but also tried stream to batc.tv as I wasn't sure which to use !
Could it be that the original streamer which is still on line is causing problems ?
Do I need to open any ports on my firewall ?
Regards Tim
I have latest image on my rpi and I'm attempting to set up the new streamer for gb3ft and I have the new credentials etc, but when I follow this guide :
https://wiki.batc.org.uk/Configuring_your_channel
and start / reboot the constant streamer nothing appears on the streamer website plus I get this in the terminal:
Starting stream
after crashing in the hour after 07 o'clock
or sometimes this
Starting stream
after crashing in the hour after 08 o'clock
I also note that when I do the below it then asks me for the stream key again
Enter your stream name (callsign) in lower case, followed by a hyphen and then the 6 character stream key. For example g8gkq-abcxyz
Press enter to get back to the main menu.
So I've tried entering just the callsign with no hyphen key and then entered the key when it asks for it - still no joy.
Any pointers as to what I've done wrong ?
I have selected streamer in output type but also tried stream to batc.tv as I wasn't sure which to use !
Could it be that the original streamer which is still on line is causing problems ?
Do I need to open any ports on my firewall ?
Regards Tim