Greetings All
I am after a firmware image to suit an Aminet125 or Amino 125.
I have one that hangs during bootup at the 'loading' page.
I believe it is trying to load a new image as the previous one has been erased.
I don't think there is any way to recover the original firmware but I stand to be corrected.
Thanks for reading this, happy New Year to all
Regards
Ross VK3CE
Amino 125
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Amino 125
Hi Ross,
I did some firmware re-loads a few years back on these.. not an easy task if i remember correctly but it can be done if you have some patience!
This will help you:
https://forum.videolan.org/viewtopic.php?f=4&t=38889
I used the image on the last message, google should be able to find a copy somwhere still i'm sure, otherwise i may stil have a copy.
Rob
M0DTS
I did some firmware re-loads a few years back on these.. not an easy task if i remember correctly but it can be done if you have some patience!
This will help you:
https://forum.videolan.org/viewtopic.php?f=4&t=38889
I used the image on the last message, google should be able to find a copy somwhere still i'm sure, otherwise i may stil have a copy.
Rob
M0DTS
Re: Amino 125
Thanks Rob,
I have downloaded the file but I am don't think it is suitable as I have a model 125 not a 110.
Regards Ross
I have downloaded the file but I am don't think it is suitable as I have a model 125 not a 110.
Regards Ross
Re: Amino 125
Ah yes different model..
Sorry i cant help any more, it was only the 110 i played about with.
Maybe it will accept that version of firmware, you could try that if nobody else has any ideas but normally firmware is very specific.
If you're very lucky you could find a place where they are still used and steal their network connection for a few minutes
Rob
Sorry i cant help any more, it was only the 110 i played about with.
Maybe it will accept that version of firmware, you could try that if nobody else has any ideas but normally firmware is very specific.
If you're very lucky you could find a place where they are still used and steal their network connection for a few minutes
Rob