Area for discussing streaming over the Internet, especially as it relates to ATV
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
- Posts: 18
- Joined: Tue Jun 16, 2020 3:41 pm
Is there any software around for a Pi (or perhaps better a Jetson??) with an HDMI dongle to take an input from my DATV receiver (local repeater) and stream it to the BATC streamer. Have tried a Chinese H.264/H.265 encoder box, but that is extremely hit and miss. At the moment I am doing it with VMIX and an HDMI dongle on a Windows machine. Works fine, but it means the Windows machine is is on 24/7. I need something dedicated that I can leave unattended that just works.
Any ideas gratefully received.
- Posts: 51
- Joined: Fri Oct 16, 2020 1:08 pm
A bit late but currently working on the same problem.
I have a LinkPi witch dous just that..
stream HDMI to a pluto and the internet...
Just not the BATC streaming service jet..
- Posts: 277
- Joined: Fri Jun 10, 2016 5:05 pm
One way to do it would be install OBS on the jetson, with a USB HDMI capture device. Then setup OBS to stream to the BATC in the normal way.
I used to use the Jetson to run OBS, LongMynd and encode H265 then stream to the Portsdown. So just streaming to the BATC should be fine.
All best John G7JTT