Standalone Stream Encoders

Area for discussing streaming over the Internet, especially as it relates to ATV
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
Post Reply
KA5BBC
Posts: 6
Joined: Thu Jun 28, 2018 6:59 pm

Standalone Stream Encoders

Post by KA5BBC » Thu Dec 06, 2018 6:34 pm

Is there a standalone stream encoder, other than an RPi, that can encode a repeater or other video and send to the BATC stream server?

I have looked at several options such as IP camera encoders, digital signage encoders, etc.
One that stands out, largely due to availability and cost, is the VBrick encoder/decoder. This unit outputs MPEG2 or MPEG4, Windows Media, H.264, and some other standards in both SD and HD. They are also in industrial enclosures therefore robust enough to survive repeater buildings.

What capabilities would such a device require?

G8DKC
Posts: 208
Joined: Thu Jun 28, 2012 9:39 am

Re: Standalone Stream Encoders

Post by G8DKC » Sat Dec 08, 2018 8:41 am

Hi,

If you PM or go to GB3UT Stream for email addresses...

Robin G8DRK and Richard G8BYI can fill you in on tests done with a RTMP stand alone box.

Regards

Peter

Post Reply

Return to “Streaming”