GB3EY on air after rebuild
Posted: Sat Jan 27, 2024 11:41 am
GB3EY was returned to service on Wednesday 24th January 2024 after two weeks off air for a rebuild.
The filters, power amplifier, driver, preamp, power supplies and case have been retained, but the logic, Ryde, encoder/modulator and streamer have been replaced.
The repeater now uses the BATC Repeater Controller software running on a Raspberry Pi 4. All signal paths are digital using HDMI and quad HDMI switches. A separate encoder takes HDMI in and outputs two IP streams, one to the BATC streamer and the other to a Pluto SDR via Ethernet. A new Ryde has been constructed to replace one that failed two years ago.
New features include a 2m receiver for DTMF commands from users, a slideshow during idle periods, an on-demand video and slide player, DVB-S2 modulation, H.265 encoding, and full HD (1920 x 1080) resolution. The BATC streamer is fed an HD (1280 x 720) stream.
The repeater is on 1308MHz, 1000kS/s, FEC is 3/4 at 25W ERP. Input is on 1275MHz using 333, 500 or 1000kS/s.
Reports would be welcome to clive @ hesh.co.uk
Clive, G3GJA
The filters, power amplifier, driver, preamp, power supplies and case have been retained, but the logic, Ryde, encoder/modulator and streamer have been replaced.
The repeater now uses the BATC Repeater Controller software running on a Raspberry Pi 4. All signal paths are digital using HDMI and quad HDMI switches. A separate encoder takes HDMI in and outputs two IP streams, one to the BATC streamer and the other to a Pluto SDR via Ethernet. A new Ryde has been constructed to replace one that failed two years ago.
New features include a 2m receiver for DTMF commands from users, a slideshow during idle periods, an on-demand video and slide player, DVB-S2 modulation, H.265 encoding, and full HD (1920 x 1080) resolution. The BATC streamer is fed an HD (1280 x 720) stream.
The repeater is on 1308MHz, 1000kS/s, FEC is 3/4 at 25W ERP. Input is on 1275MHz using 333, 500 or 1000kS/s.
Reports would be welcome to clive @ hesh.co.uk
Clive, G3GJA